[Live-devel] use decoder for multicast rtp -live555MediaServer

[Camilo Andrés Huertas Huertas]

Good day
My question is the following, I have a decoder that generates multicast in this url rtp: //226.0.0.1: 1234, as I can mount in the live555MediaServer, the url that generates me is rtsp: //190.27.246.98/ <filename>
Thanks and i hope you can help me.
Camilo Andrés Huertas H.
Ing. Sistemas - Ingeniero Soporte Área Tecnología.
Tel: [phone] Ext 400

[Ross Finlayson]

Good day
My question is the following, I have a decoder that generates multicast in this url rtp: //226.0.0.1: 1234, as I can mount in the live555MediaServer, the url that generates me is rtsp: //190.27.246.98/ <filename>
Thanks and i hope you can help me.

You’re going to have to be a lot more specific about exactly what you want to do. The “LIVE555 Media Server” streams (via unicast) pre-recorded media files; it has nothing to do with multicast streams. So, you probably don’t want to use the “LIVE555 Media Server” at all.

Do you want to develop a (unicast) RTSP server that takes your multicast stream as input? If so, you can probably do this using our “testOnDemandRTSPServer” demo application as a model - but (if you want our help) you’ll need to tell us a lot more about what this multicast stream is. E.g., is it raw-UDP, or RTP? If it’s RTP, what is the RTP payload format. If it’s raw-UDP, is it a Transport Stream, or something else??


Ross Finlayson
Live Networks, Inc.
http://www.live555.com/